ECG Electrode

Item# EL001

ECG Electrode, which is used for various ECG tests in diagnostic or monitoring, it uses an Ag/AgCl sensor element and solid conductive & adhesive hydro-gel for adhesion.The Ag/AgCl sensor element has the best sensitivities and the solid conductive & adhesive hydro-gel has very low impedance and is non-irritating, non-sensitizing and non-cytotoxic to the skin.

• Solid gel, foam (1.0mm), (for adult)
• ECG electrode Shape: Round, Oval, Square
• 1/25″ thick white foam
• Metal snap: stainless steel stud (thick 0.6 mm)
• Label: white PE tape indicated brand mark (32-35mm wide)
• Base foam: white or original color PE foam tape with medical pressure sensitive gel    (thick: 1.0mm, width: 44.0mm, density: about 60kg/m3)
• Ag/AgCl: Ag/AgCl chemical electrode coated on the ABS plastic
• Sold gel: medical conductive gel made of many chemical meet UPS
• Film: PET release linear (thick: 0.1mm, width: 55mm)

 Feature of ECG Electrodes

1. Latex free.
2. Adult, child available.
3. Different shapes, sizes, materials available.

Usage Guide for ECG Electrodes

• Open the single patient kit only immediately before use. Remove inner bag. Unwind sets from the holder card.
• Check if the electrodes are undamaged. In case of any damage, discard the product.
• Gently remove electrode sets from the release liner by peeling away from the thumb tab.
• Place the electrodes on the patient.
• Connect the set of lead wires to the appropriate trunk cable from product range.
• When applicable, close the bag carefully so that the remaining electrodes do not dry out.
• Start ECG recording. If the ECG trace is not acceptable, check that the electrodes are positioned correctly and well attached to the skin. If the trace is still not acceptable, discard the product and place a new one.